Blade Guard: Completely encloses blade in rest
position; lower rotating blade guard pivots up into
main stationary blade guard as saw heads pivot
down to cut.

Fences: On each side of blade are keyed
to base and are easily adjustable front to back
and side to side.

Actuation: Two inside vertical clamps must be tripped
by foot valve, then a two-hand anti-tie down, maintained
contact safety control will work the air downfeed of
saw heads; an air filter/regulator/lubricator with auto
drain is provided.

Air Pressure & Consumption: 75 PSI (5.2kg/cm2);
4 CFM at 75 PSI (.11 cubic meters at 5.2 kg/cm2);
based on 10 strokes per minute.

Dust Collection: Four, 4” round (102mm) outlets are
provided, two for each saw head; 900 CFM required
per saw head.

Production Rates: 10 strokes per minute; actual
production rates will vary with type and width
of material to be cut.

Size & Weight: 32” (81cm) front to back x 64” (163cm)
High x 120” (305cm) Long; Weight 1,200 lbs. (544kg).

Cutting Capacity: 90° Straight Cut;
2-1/2” (64mm) High x 7” (178mm) Wide

45° Mitre;
3-1/2” (89mm) High x 3-1/2” (89mm) Wide

90° Front to Back/45° Compound;
1” (25mm) High x 7” (178mm) Wide

90° Front to Back 45° Compound Cutting

*Note: Dimensions shown are set for cutting capacities with
cylinder set for Mitre & Compound Mitre. Wider material up
to 2-1/2” (63mm) High x 8-1/2” (216mm) Wide at 90° and 2-1/2”
(63mm) High x 5-1/2” (140mm) Wide at 45° Mitre can be
achieved re-adjusting the cylinder for maximum depth.
Consult factory for details.