Actuation: Two inside vertical clamps must be tripped by foot valve, then a
two-hand anti-tie down, maintained contact safety control will work the air
downfeed of saw heads; an air filter/regulator/lubricator with auto drain is provided.

Air Pressure & Consumption: 4 CFM at 75 PSI (.11 cubic meters at 5.2kg/cm2);
based on 10 strokes per minute.

Dust Collection: Four dust outlets are provided--two 5” (127mm) round, two 4”
(102mm) round; two outlets per saw head; 1200 CFM required per head; dust
collector not included.

Production Rate: 10 strokes per minute; actual production rates will vary with
type and width of material to be cut.

Size & Weight: 40” (102cm) front to back x 69” (175cm) High x 120” (305cm) Long;
Weight 1,500 lbs. (680kg).

Model CDM60 Mitre and Compound Mitre
Full Length View

Cutting Capacity: 90° Cutting; 4” (102mm) High x 10-1/2” (267mm) Wide 45° Mitre;
4” High (102mm) x 7-1/4” (184mm) Wide 90° Front to Back/45° Compound; 2-5/8”
(67mm) High x 10” (254mm) Wide

Call CTD for additional cutting capacities. (213) 689-4455