Fences: On each side of blade are keyed to
base and are easily adjustable front to back.

Actuation: Two inside vertical clamps must
be tripped by foot valve, then a two-hand
anit-tie down, maintained contact safety
control will work the air/hydraulic downfeed
of saw heads; an air filter/regulator/lubricator
with auto drain in provided; infinite speed
control is provided.

Air Pressure & Consumption: 80 PSI
(5.6 kg/cm2); 6 CFM at 80 PSI (.18 cubic
meters at 5.6 kg/cm2) based on 10 strokes
per minute.

Dust Collection: Four 4” (102mm) round outlets
are provided, two for each saw head on DM400;
900 CFM required per head.

Production Rates: 10 strokes per minute; actual
production rates will vary with type and width
of material to be cut.

Size & Weight: 80” (203cm) High x 54” (137cm)
Front to Back x 156” (397cm) Long;
Weight 2,500 lbs. (1,134kg).

Cutting Capacity:
16” (406mm) OD Blade:
90° Cutting; 3” (76mm) High x 9-1/2” (241mm) Wide
45°Cutting 3-1/2” (89mm) High x 7” (178mm) Wide

20” (504mm) OD Blade:
90° Cutting 6” (152mm) High x 10” (254mm) Wide
45°Cutting 5-1/2” (140mm) High x 8” (203mm) Wide