CTD PRODUCTS
CTD PARTS
Toll Free: 888-612-5889
Phone: 213-689-4455
Fax: 213-689-1255

E-mail: ctdsaw@ctdsaw.com
Mon-Fri: 7:30 AM - 4:30 PM PST
Sign In Register Order Status View Cart

CTD DM400 16

CTD DM400 16

16" Double end trim mitre saw


The DM400 uses two standard 400 Series saw heads. See 400 Series features and specifications for head details.
Item # :  DM400
  • *Double end trim mitre saw
  • *Blade Capacity: 16"& 20"
  • *8½ H.P. 3 phase
  • *Magnetic Starter
  • *10 strokes per min
  • *Mitres up to 45°
  • *Cutting Capacity:
  • 16" Blade Capacity: 45°: 3" X 7¾ 90°: 3" X 11"
  • 20" Blade Capacity: 45°: 5¼" X 8" 90°:5½X11½

Blade Capacity
16" OD 406mm standard; 20" 504mm optional; saw blades not included.

Arbor & Pivot
1" 25mm with 5" 127mm saw collars, spindle mounted on preloaded and sealed bearings; with V-belt drive completely enclosed; pivot uses Timken bearings lubricated for life.

Motors & Starters
8-1/2 H.P. 3 Phase 230/460 Volt Totally Enclosed Fan Cooled Motors with Magnetic Starter standard; 10 H.P. and 15 H.P. motors available as optional extra.

Table
Saw heads swivel from 90° to 45° toward each other with degree markings and pointer; stops are at 90° and 45°; angular adjustment of saw head away from each other available as option; other angles possible.

Floor Stand
Heavy gage steel; 8 foot 244cm centers with traveling right hand carriage on rack and pinion; length measuring scale; optional length centers available to 40 feet 12M; digital length measurement available as optional accessory.

Blade Guard
Completely encloses blade in rest position; pivots up, away from base.

Fences
On each side of blade are keyed to base and are easily adjustable front to back.

Actuation
Two inside vertical clamps must be tripped by foot valve, then a two-hand anit-tie down, maintained contact safety control will work the air/hydraulic downfeed of saw heads; an air filter/regulator/lubricator with auto drain in provided; infinite speed control is provided.

Air Pressure & Consumption
80 PSI 5.6 kg/cm2; 6 CFM at 80 PSI .18 cubic meters at 5.6 kg/cm2 based on 10 strokes per minute.

Dust Collection
Four 4" 102mm round outlets are provided, two for each saw head on DM400; 900 CFM required per head.

Production Rates
10 strokes per minute; actual production rates will vary with type and width of material to be cut.

Size & Weight
80" 203cm High x 54" 137cm Front to Back x 156" 397cm Long; Weight 2,500 lbs. 1,134kg.

Cutting Capacity
16" 406mm OD Blade: 90° Cutting; 3" 76mm High x 9-1/2" 241mm Wide 45°Cutting 3-1/2" 89mm High x 7" 178mm Wide
20" 504mm OD Blade: 90° Cutting 6" 152mm High x 10" 254mm Wide 45°Cutting 5-1/2" 140mm High x 8" 203mm Wide


Tax Deduction Info on www.Section179.Org!
CTD Machines
2382 E 48th St, Vernon CA 90058
Phone 213-689-4455 / Fax 213-689-1255
E-mail: ctdsaw@ctdsaw.com
Copyright © 2017 CTD Machines. All rights reserved.
Shopping Cart Software powered by ecMidas.