Toll Free: 888-612-5889
Phone: 213-689-4455
Fax: 213-689-1255

E-mail: ctdsaw@ctdsaw.com
Mon-Fri: 7:30 AM - 4:30 PM PST
Sign In Register Order Status View Cart

CTD Model N80 13

CTD Model N80 13

13" Vertical frame and notching saw

The Model N80 is used for a variety of cutting applications including 45° double mitre cutting, notching and bending of aluminum and plastic extrusions, or toe-notching of wood panels. This heavy duty machine can have blades set for notching or mitering. Blades move vertically on linear bearings on 1" (25mm) hardened and ground rods. Keyed fences allow for each set-up and accurate dimensional changes.
Item # :  N80
  • *Vertical Frame and Notching Saw
  • *Blade Capacity: 13"
  • *2 H.P. 3phase
  • *Magnetic Starter
  • *3450 RPM
  • *Cutting Capacity:
  • Toe Notch Con g.: 4½"X4½" deep X3" high
  • Mitre: 3½ (wide)X 3" ( 3½" X 5" available with extra charge)

Blade Capacity
13" OD (330mm); saw blades not included.

1" (25mm) with 3" (76mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive; 3450 RPM of spindle.

Motors & Voltages
Two, 2 H.P. 3 Phase 230/460 Volt Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter; 3 H.P. Motors available.

Table Base
Precision machined and ground iron castings with milled keyways to guide fences; allows for easy and accurate dimensional changes.

Floor Stand
Heavy gage steel; stand is completely enclosed with 6" (152mm) dust collector outlet and scrap chute; 1200 CFM required.

Air operated by foot valve with cover.

Air Pressure & Consumption
3 CFM at 80 PSI (.09 cubic meters/minute at 5.6 kg/cm2) based on 10 strokes per minute; includes air filter/ regulator/lubricator with auto drain.

Size & Weight
43" (109cm) Wide x 38" (97cm) front to back x 58" (147cm) High; Weight 750 lbs. (340kg).

Production Rate
Up to 15 strokes per minute.

Cutting Capacity
Staggered Saw Blades/ Toe-Notch Configuration; 4-1/2" (114mm) x 4-1/2" (114mm) Deep x 3" (76mm) High
Mitre Cutting/Staggered Saw Blades; 3-1/2" (89mm) Wide x 3" (76mm) High
Mitre Configuration/Non-Staggered Saw Blades; 3-3/8" (86mm) Wide x 3" (76mm) High; up to 5" (127mm) High with special blade guard modification at extra charge.

Tax Deduction Info on www.Section179.Org!
CTD Machines
2382 E 48th St, Vernon CA 90058
Phone 213-689-4455 / Fax 213-689-1255
E-mail: ctdsaw@ctdsaw.com
Copyright © 2018 CTD Machines. All rights reserved.
Shopping Cart Software powered by ecMidas.