This rugged, accurate heavy duty industrial indexing 
mitre cut-off saw uses our time tested 200 series 
sawhead. It will mitre up to 45 degrees each side 
of 0 degrees, with positive pin stops at 45, 30, 22 ½, 
15, 0, 15, 22 ½, 30, and 45 degrees.

STANDARD FEATURES
& SPECIFICATIONS:

Blade Capacity: 12" OD (305mm) standard.

Spindle & Pivot Shaft have preloaded, sealed ball
bearings; .001 alignment of spindle and pivot.

Arbor is 1" (25.4mm) OD with 2-1/2" (64mm) saw collars;
3700 RPM.

Motors: 2 H.P. 1 or 3 Phase totally enclosed fan cooled
with toggle switch; enclosed 2-belt drive.

Iron Castings: Base & disc are made from precision
machined iron castings for lasting accuracy. Disc is
set flush with table and graduated each degree.

Blade Guard: Completely encloses blade in rest position.
Lower rotating blade guard pivots up into main stationary
blade guard as saw heads pivot down to cut.

Actuation: Manual hand operation; optional
power feed of saw head.

Dust Outlet: Two 2" dust outlet provided. 600 CFM
required for each.

Optional extras include Power Downfeed of Saw,
Clamps, Magnetic Starters, Floor Stand,
Measuring Fences, and Table Supports.

Size & Weights: 22" (56cm) Wide x 27" (69cm)
Front to Back x 22-1/2" (57cm) High. Weight 150 lbs.(68 kgs).

CTD Model M25R 

Cutting Capacity with fences set at center line:  
M25R/45° 2-1/2"(64mm) High x 3-1/2"(89mm) Wide
M25R/90° 2-1/2"(64mm) High x 5"(127mm) Wide

Maximum Cutting Capacity: M25R/45° 
12" Blade Capacity (305mm)
2-5/8"(67mm) High x 4-1/4" (108mm) Wide

Maximum Cutting Capacity: M25R/90° 
12" Blade Capacity (305mm)
2-1/2"(64mm) High x 7-1/2" (191mm) Wide