The CTD 400 Series Cut Off Saws are designed for
heavy duty production cutting of aluminum, wood,
plastics and steel. These rugged, heavy duty
machines offer years of precision cutting.

STANDARD FEATURES
& SPECIFICATIONS:

Blade Capacity: Models M416 & F426, 16” OD
(406mm); Models M516 & F526, 20” OD (504mm);
saw blades not included.

Arbor: 1” (25mm) with 5” (127mm) saw collars.

Spindle & Pivot: Spindle mounted on preloaded
and sealed bearings; with V-belt drive completely
enclosed; pivot uses Timken bearings lubricated for life.

Motors & Starters: 7-1/2 H.P. 3 Phase 230/460 Volt
Totally Enclosed Fan Cooled Motor with Magnetic
Starter standard; 10 H.P. & 15 H.P. motors available
as optional extra.

Floor Stand: Heavy gage steel sheet and angle.

Table Base: Precision machined cast iron base with
milled keyways to guide fences; disc set flush with base.

Dust Outlet: Two 4” (102mm) outlets provided;
1200 CFM required.

Production Rate: Up to 10 strokes per minute;
actual production rates will vary with the type
and width of the material to be cut.

Actuation: Hand operated standard; optional
Power Downfeeds of Sawheads actuated by
Two-Hand, Anti-Tie Down Maintained Contact
Safety Control.

Air Pressure & Consumption: 3 CFM at 80 PSI
(.09 cubic meters/minute at 5.6 kg/cm2) based on
10 strokes per minute; air filter/regulator/lubricator
with auto drain included.

Size & Weight: 48” (122cm) Wide x 40” (102cm)
Front to Back x 70” (178cm) High;
Weight is 850 lbs. (386kg).

Optional Extras Include: Power Downfeeds of
Sawheads, Clamps, Measuring Systems and
Table Supports.

M416 Shown with Optional Accessories