The Model N80 is used for a variety of cutting applications
including 45° double mitre cutting, notching and bending
of aluminum and plastic extrusions, or toe-notching of wood
panels. This heavy duty machine can have blades set for
notching or mitering. Blades move vertically on linear
bearings on 1" (25mm) hardened and ground rods. Keyed
fences allow for each set-up and accurate dimensional changes.

STANDARD FEATURES & SPECIFICATIONS:

Blade Capacity: 13" OD (330mm); saw blades not included.

Arbor: 1" (25mm) with 3" (76mm) saw collars; mounted on
preloaded and sealed bearings; 2-belt drive; 3450 RPM of spindle.

Motors & Voltages: Two, 2 H.P. 3 Phase 230/460 Volt Totally
Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual
Magnetic Starter; 3 H.P. Motors available.

Table Base: Precision machined and ground iron castings
with milled keyways to guide fences; allows for easy and
accurate dimensional changes.

Floor Stand: Heavy gage steel; stand is completely enclosed
with 6" (152mm) dust collector outlet and scrap chute;
1200 CFM required.

Actuation: Air operated by foot valve with cover.

Air Pressure & Consumption: 3 CFM at 80 PSI
(.09 cubic meters/minute at 5.6 kg/cm2) based on
10 strokes per minute; includes air
filter/ regulator/lubricator with auto drain.

Size & Weight: 43" (109cm) Wide x 38" (97cm) front
to back x 58" (147cm) High; Weight 750 lbs. (340kg).

Production Rate: Up to 15 strokes per minute.

Cutting Capacity: Staggered Saw Blades/ Toe-Notch
Configuration; 4-1/2" (114mm) x 4-1/2" (114mm) Deep
x 3" (76mm) High

Mitre Cutting/Staggered Saw Blades; 3-1/2" (89mm)
Wide x 3" (76mm) High

Mitre Configuration/Non-Staggered Saw Blades; 3-3/8"
(86mm) Wide x 3" (76mm) High; up to 5" (127mm) High
with special blade guard modification at extra charge.

Model N80 Toe-Notch Configuration

Clamp Close-Up with Keyed Fences