top of page
BUY- NEW

12" Fixed head double mitre saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45° mitres at one time, saving time and materials. D45s are used by thousands in the decorative art trade throughout the world.

Specifications

  • Fixed Head Double Mitre Saw

  • Blade Capacity: 12" (14" available)

  • 2 H.P. 1 or 3 phase

  • Magnetic Starter

  • 3450 RPM

  • Cutting Capacity:

  • 12": 4" X 2.375"

  • 14": 4" X 2.5" or 2"X6

Blade Capacity 

  • 10" OD 254mm Saw blades not included.

  • 12" OD 305mm optional.

  • 14" OD 356mm optional.

Arbor

  • 5/8" 16mm with 2-1/4" 57mm saw collars.

Spindle & Pivot 

  • Both mounted on pre-loaded and sealed ball bearings.

Motors & Starters 

  • 1-1/2 H.P. single phase 115/230 Volt and 3 phase 230/460 Volt, Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter. Consult factory for amerage load of motors.

Table Height 

Blade Wear & Angular Adjustments

  • Each saw head has adjustments for blade variation. Allows for precision alignment of blades to minimize scrap. Saw heads are adjustable up to 3°, always assuring perfect mitres.

Length of Stroke Adjustment 

  • The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, thereby saving wasted time and motion.

Production Rate 

  • The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
     

Size 

  • Standard machine, without tables or gages; Weight 550 lbs. 250kg; 46" 117cm Wide x 22" 56cm front to back x 51-1/2" 131cm High.

Crated Size 

  • 34-1/2" 88cm from floor.

Floor Stand 

  • Close coupled heavy gage steel stand completely enclosed with 6" dust outlet. 1200 CFM required.

Air Consumption 

  • 1.0 CF per 10 strokes at 75 PSI .043 cubic meters per minute at 5.4 kg/cm2.

  • 45" 114cm Wide x 28 -1/2" 72cm front to back x 60" 152cm High.

Actuation 

  • Pneumatic foot valve with cover.

Air Pressure 

  • 75 PSI 5.4 kg/cm2 with Air Filter/Regulator/ Lubricator; includes Auto Drain.

Instructions Manual

contact
bottom of page