top of page

16" Compound double end trim mitre saw

The CTD Model CDM60 offers a maximum of flexibility and cutting capacities.


  • Compound double end trim mitre saw

  • Blade Capacity: 16"

  • 3 H.P. 3 phase

  • Magnetic Starter

  • 10 strokes per min.

  • Cutting Capacity

  • 45°: 4" X 7¼" 90°: 4" X 10½"

  • 45° compound: 4" X 7¼

Blade Capacity 

  • 16" OD (406mm); saw blades not included.


  • 1" (25mm) with 3-1/2" (89mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive centered between bearings; 2800 RPM of spindle.

Motors & Voltages 

  • Two 3 H.P. 3 Phase 230/460 Totally Enclosed Fan Cooled Motors, 60 Hz, 1725 RPM with starters; 5 H.P. motors available; consult factory for amperage ratings.

Iron Castings 

  • Saw arms, pivot brackets, and tables are precision machined and ground iron castings with milled keyways in table to guide fences.

Cutting Capacity 

  • 90° Cutting; 4" (102mm) High x 10-1/2" (267mm) Wide

  • 45° Mitre; 4" High (102mm) x 7-1/4" (184mm) Wide

  • 90° Front to Back/45° Compound; 2-5/8" (67mm) High x 10" (254mm) Wide
    Refer to price list CTD Double End Trim Mitre & Compound Mitre Saws for additional cutting capacities.


  • Tables swivel from 90° to 45° toward each other with degree markings and pointer; stops are at 90° and 45°; angular adjustment in opposite direction available.

Floor Stand 

  • Heavy gage steel; eight foot (2.4M) centers with traveling right hand carriage on rack and pinion; length measuringscale; optional length centers available to 40 feet (12M); Digital Length Measurement available as optional accessory.


  • Inside and outside fences are keyed to base and are easily adjustable front to back, and side to side.


  • Two inside vertical clamps must be tripped by foot valve, then a two-hand anti-tie down, maintained contact safety control will work the air downfeed of saw heads; an air filter/regulator/lubricator with auto drain is provided.

Air Pressure & Consumption 

  • 4 CFM at 75 PSI (.11 cubic meters at 5.2kg/cm2); based on 10 strokes per minute.

Production Rate 

  • 10 strokes per minute; actual production rates will vary with type and width of material to be cut.

Size & Weight 

  • 40" (102cm) front to back x 69" (175cm) High x 120" (305cm) Long; Weight 1,500 lbs. (680kg).

Instructions Manual

bottom of page