16" Vertical frame and notching saw
The Model N90 has been designed for a variety of heavy duty cutting applications, such as 45° double mitre cutting, notching of aluminum and plastic extrusions, or toe-notching of wood panels. This heavy duty machine can have blades set for notching or mitering. Blades move vertically on linear bearings on 1-1/4" (32mm) diameter hardened and ground rods. Keyed fences allow for each set-up and accurate dimensional changes.
Specifications
-
Vertical Frame and Notching Saw
-
Blade Capacity: 16"
-
3 H.P. 3 phase
-
Magnetic Starter
-
2800 RPM
-
Cutting Capacity
-
Toe Notch Con g.: 6" X6"(deep)X 4" (high)
-
Mitre: 4"(wide)X 4" ( 4" X 6" available with extra charge)
Blade Capacity
-
16" OD (406mm); saw blades not included.
-
18" OD (457mm); optional
Arbor
-
1" (25mm) with 3-1/2" (89mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive; 2800 RPM of spindle.
Motors & Voltages
-
Two, 3 H.P. 3 Phase 230/460 Volt Totally Enclosed Fan Cooled Motors, 60 Hz, 1725 RPM with Dual Magnetic Starter; 5 H.P. Motors available.
Table Base
-
Precision machined and ground iron castings with milled keyways to guide fences; allows for easy and accurate dimensional changes.
Actuation
-
Air operated by foot valve with cover.
Air Pressure & Consumption
-
6 CFM at 100 PSI (.17 cubic meters/minute at 7.03 kg/cm2) based on 6 strokes per minute; includes air filter/ regulator/lubricator with auto drain.
Size & Weight
-
Standard Toe-Notch Machine 42" (107cm) Wide x 42" (107cm) front to back x 62" (157cm) High; Weight 900 lbs. (410kg).
Production Rate
-
Up to 10 strokes per minute.
Cutting Capacity
-
Staggered Saw Blades/ Toe-Notch Configuration; 6" (152mm) x 6" (152mm) Deep x 4" (102mm) High
-
Mitre Cutting/Staggered Saw Blades; 4-1/8" (105mm) Wide x 4" (102mm) High
-
Mitre Configuration/Non-Staggered Saw Blades; 4" (102mm) Wide x 4" (102mm) High; up to 6" (152mm) High with special blade guard modification at extra charge.
Floor Stand
-
Heavy gage steel; stand is completely enclosed with 6" (152mm) dust collector outlet and scrap chute; 1200 CFM required.